| Action | Description | |--------|-------------| | | Disassemble the printer and replace the felt pads with original or compatible ones. | | Option 2: External Waste Tank (Best DIY) | Drill a small hole in the printer case, route the waste tube into an external bottle. | | Option 3: Absorb old ink | Open case, remove pads, squeeze out old ink (messy), dry pads, reinstall. | 7. Troubleshooting Common Errors | Problem | Solution | |---------|----------| | Program says “Communication error” | Reinstall Epson driver; use USB 2.0 port; disable firewall temporarily. | | Reset completes but error returns | You did not check both counters (Main + Platen). Repeat reset. | | Printer still shows “Service Required” after reset | Hold “Stop” + “Power” button for 10 seconds to exit service mode manually. | | Cannot find Epson L220 in software list | Use model L210 or L222 – same internal mechanism. | 8. Conclusion The Epson L220 waste ink counter can be successfully reset using third-party adjustment software. However, this is a temporary fix . To avoid permanent damage, install an external waste ink tank after the first reset.
Perform this reset no more than 2–3 times . After that, physically replace or modify the waste ink system. This report is for educational and service purposes only. Resetting may void any remaining warranty. reset epson l220